Pianos consistently make movers yearly list of items that are most frequently harmed. Grand pianos are particularly bothersome. Practicing the following treatments for disassembling, cushioning and packing grand pianos will avoid damage, lower claims cost, and enhance client satisfaction.
1) A minimum of three individuals are required to deal with an infant grand piano. If the baby grand piano requires to increase or down stairs or if a full or performance grand piano needs to be transferred, a minimum of 4 individuals are required.
2) Always finish a precise and extensive stock. It might be required or more effective to use a visual inventory to sufficiently explain and reveal pre-existing damage.
3) As different parts are dismantled, please place all hardware in a correctly identified parts bag and then place the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furniture pad.
5) Detach the lid by eliminating the hinge pins. Wrap the lid in a tidy furnishings pad.
6) Eliminate the prop that holds the lid open and cover it in a clean furniture pad. The prop has a hinge pin and is in 2 pieces.
7) Eliminate the pedal assembly and wrap it in a tidy furniture pad. The braces at the back of the assembly rest in slots at each end. When removing the screws, please be careful not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the suitable number on each rod. Note: If masking tape is unavailable, please usage correctly identified parts bags for this function. When reassembling at location, please make sure to put the rods in the proper order so that the pedals will work effectively.
8) Pad the piano by placing a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Note: Please make sure that the surface of the piano is dust-free prior to padding it.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one person underneath the piano at the left end of the keyboard. The other two individuals need to support the left front corner. The individual below the piano must turn the retaining block so that the long end points far from the leg. The screws, if there are any, must then be eliminated. The "underneath" individual must then get out from under the piano prior to in fact eliminating the leg. Be sure to have 2 people raising the corner of the piano while the third individual eliminates the leg. Note: Please make certain to note which legs were gotten rid of from which positions considering that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the entire piano somewhat while completing this maneuver to prevent undue pressure on the remaining, connected legs as the piano pointers. Be sure that the piano is focused comfortably against the brace at the end of the piano board.
12) Get rid of the two remaining legs and wrap them in tidy furnishings pads. These legs are kept in place by a "key and slot" plan. To remove the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furniture pads but under the straps to supply additional protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano Clicking Here up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for protection versus residence damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the leading end of the piano board to prevent the piano from slipping.
16) To fill the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard dealing with the wall of the preceding tier. The very best location to fill the padded lid is in between the piano and the preceding tier or in between the piano and the wall.
Grand pianos represent a considerable obstacle, they can be moved without damage by utilizing common sense and practicing the procedures noted above.